Description

950nm AR-coating MM Fiber Patchcord

950nm AR-coating MM Fiber Patchcord is special designed for lower the light back reflection and increase the transmission efficiency. The fiber patchcord termination connector could be FC, SC, LC, SMA connector or customized.Usually, the fiber patchcord will have one end AR-coated, and the AR-coated end will be well marked.

Application:	Features:
Fiber Communication	Low Reflectivity
Fiber Optic Sensor	Low Insertion Loss
Testing System	High Quality Ferrule
Lab And Research	High Reliability

Specification:

Parameter	Symbol	Value	Unit
Center Wavelength	λ	950	nm
Coating Bandwidth	Bw	±50nm or customized	nm
Typ. Insertion Loss	IL	0.3	dB
Max. Insertion Loss	IL	0.5	dB
Max. Average AR-Coating Reflectivity	Ravg	0.25	%
Fiber Type		50/125, 62.5/125 or 105/125 MM fiber	–
Max. Tensil Load	P	5	N
Max. Optical Power (CW)	T	500 or customized	mW
Operating Temperature	T	-5~75	℃
Storage Temperature		-40~85	℃

Notice: Above specifications are tested at center wavelength in room temperature @23℃.

Specifications may change without notice.

Drawing:

Ordering Information (Part Number):

AMMFP-WWW-FF-J-LL-CC-CC
WWW	FF	J	LL	CC	CC
Wavelength	Fiber Type	Fiber Jacket	Fiber Length	Connector 1	AR-coated Connector 2
905 – 905nm	M1 – 105/125 MM FIber	B – Bare Fiber	05 – 0.5m	NE – None	FA – FC/APC
915 – 915nm	M5 – 50/125 MM FIber	9 – 900um Loose Tube	10 – 1.0m	FA – FC/APC	FU – FC/UPC
920 – 920nm	M6 – 62.5/125 MM FIber	2 – 2.0mm Loose Tube	15 – 1.5m	FU – FC/UPC	SA – SC/APC
930 – 930nm		3 – 3.0mm Loose Tube	20 – 2.0m	SA – SC/APC	SU – SC/UPC
940 – 940nm		A – Armoured Cable	30 – 3.0m	SU – SC/UPC	LA – LC/APC
950 – 950nm			SS – Specify	LA – LC/APC	LU – LC/UPC
975 – 975nm				LU – LC/UPC	S9 – SMA905
980 – 980nm				S9 – SMA905	SS – Specify
SSS – Specify				SS – Specify

Example: AMMFP-950-M5-9-10-FU-FU is the PN for 950nm AR-coating MM Fiber Patchcord, 950±50nm coating, 1.0m 50/125 MM Fiber, 900um loose tube, FC/UPC-FC/UPC