Description
950nm MM Fiber Patchcord
950nm MM Fiber Patchcord is built with MM fiber, it’s widely used in Fiber Communication, Fiber Optic Sensor, Optical Testing System, the termination connector can be FC, SC, LC. ST, the jacket diameter can be 0.9, 2.0, 3.0mm or armoured type.
| Application: | Features: |  |
| Fiber Communication | Low Insertion Loss | |
| Fiber Optic Sensor | High Return Loss | |
| Testing System | High Quality Ferrule | |
| Lab And Research | High Reliability |
Specification:
| Parameter |
Symbol | Value |
Unit |
| Center Wavelength |
λ | 950 | nm |
| Typ. Insertion Loss |
IL | 0.3 | dB |
| Max. Insertion Loss | IL | 0.5 | dB |
| Min. Return Loss | RL | 35 | dB |
| Fiber Type | 50/125, 62.5/125 or 105/125 MM fiber | – | |
| Max. Tensil Load | 5 | N | |
| Max. Optical Power (CW) | P | 500 or customized | mW |
| Operating Temperature | T | -5~75 | ℃ |
| Storage Temperature | T | -40~85 | ℃ |
| Notice: Above specifications are tested at center wavelength in room temperature @23℃. |
Drawing:
Ordering Information (Part Number):
| MMFP-WWW-FF-J-LL-CC-CC |
|||||
| WWW | FF | J | LL | CC | CC |
| Wavelength | Fiber Type | Fiber Jacket | Fiber Length | Connector 1 | Connector 2 |
| 905 – 905nm | M1 – 105/125 MM Fiber | B – Bare Fiber | 05 – 0.5m | FA – FC/APC | NE – None |
| 915 – 915nm | M5 – 50/125 MM Fiber | 9 – 900um Loose Tube | 10 – 1.0m | FU – FC/UPC | FA – FC/APC |
| 920 – 920nm | M6 – 62.5/125 MM Fiber | 2 – 2.0mm Loose Tube | 15 – 1.5m | SA – SC/APC | FU – FC/UPC |
| 930 – 930nm | 3 – 3.0mm Loose Tube | 20 – 2.0m | SU – SC/UPC | SA – SC/APC | |
| 940 – 940nm | A – Armoured Cable | 30 – 3.0m | LA – LC/APC | SU – SC/UPC | |
| 950 – 950nm | SS – Specify | LU – LC/UPC | LA – LC/APC | ||
| 975 – 975nm | SS – Specify | LU – LC/UPC | |||
| 980 – 980nm | SS – Specify | ||||
| SSS – Specify | |||||
Example: MMFP-950-M5-9-10-FU-FU is the PN for 950nm MM Fiber Patchcord, 1.0m 50/125 MM Fiber, 900um loose tube, FC/UPC-FC/UPC
