Description
1040±50nm High Power Broadband PM Optical Isolator
1040±50nm High Power Broadband PM Optical Isolator is a fiber passive component built with TGG crystal, it allows light signal to be delivered in one forward direction and avoid the back reflection light, it’s widely used in OCT system, fiber optic sensor system to protect the light source and lower down the system optical signal noise. The higher power type is available upon request.
| Application: | Features: |  |
| OCT | Wide Band | |
| Fiber Optic Sensor | High Isolation | |
| Testing System | Low Insertion Loss | |
| Lab & Research | High Reliability |
Specification:
| Parameter | Symbol | Value | Unit |
| Center Wavelength | λ | 1040 | nm |
| Bandwidth | BW | ±50 | nm |
| Typ. Insertion Loss @ ±50nm | IL | 0.6 | dB |
| Max. Insertion Loss @ ±50nm | IL | 1.0 | dB |
| Typ. Peak Isolation ±50nm | ISO | 35 | dB |
| Min. Isolation ±50nm | ISO | 25 | dB |
| Min. Extinction Ratio | ER | 18 | dB |
| Min. Return Loss | RL | 50 | dB |
| Max. Optical Power (CW) | P | 0.5, 1, 3, 5, 10, 20 or customized | W |
| Max. Peak Power | P | 5, 10 or customized | kW |
| Max. Tensil Load | 5 | N | |
| Fiber Type | PM 980 Panda fiber | – | |
| Operating Temperature | T | 10~50 | ℃ |
| Storage Temperature | T | 0~60 | ℃ |
| Package Dimension | 55x30x29 | mm |
| Notice: Above specifications are tested without connector in room temperature @23℃. |
| For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower. ER will be 2dB lower |
| Slow axis is default aligned to the connector key. Connectors only 1W CW optical power guarantee |
Drawing:
Spectrum Curve:
 |
 |
Ordering Information (Part Number):
| HBPMI-WWWW-HH-A-J-LL-CC |
|||||
| WWWW | HH | A | J | LL | CC |
| Wavelength | Handling Power | Working Axis | Fiber Jacket | Fiber Length | Connector |
| 1030 – 1030nm | Z5 – 0.5W | F – Fast Axis Blocked | B – 250um Bare Fiber | 05 – 0.5m | NE – None |
| 1040 – 1040nm | 01 – 1W | Slow Axes Working | 9 – 900um Loose Tube | 10 – 1.0m | FA – FC/APC |
| 1050 – 1050nm | 03 – 3W | B – Both Axes Working | 15 – 1.5m | FU – FC/UPC | |
| 1060 – 1060nm | 05 – 5W | 20 – 2.0m | SS – Specify | ||
| SSS – Specify | 10 – 10W | SS – Specify | |||
| 20 – 20W | |||||
| SS – Specify | |||||
Example: HBPMI-1040-05-B-9-10-NE is the PN for 1040±50nm High Power Broadband PM Optical Isolator, 5W Optical Power, Both Axes Working, 1.0m PM fiber, 900um loose tube, no connector
