CWDM PM Pigtailed DFB Laser Diode

Wavelength: 1270-1610nm

LD Type: Fiber Pigtailed

LD Chip: DFB

Fiber Type: PM Panda Fiber

Inquiry now Download pdf

product introduction

CWDM PM Pigtailed DFB Laser Diode

CWDM PM Pigtailed DFB (Distributed Feedback) Laser Diode is a semiconductor optoelectronic product which can
output stable laser light by the pigtailed polarization maintaining fiber. the Laser Diode with PD built in to monitor the
optical signal power. It features low threshold current and high quality laser output, it's widely used in Laser imaging,
fiber optic sensor and WDM System. Higher Power output type is available.

Application:

Features:

Data Transmission
Fiber Optic Sensor
Laser Imaging
Testing System

Low Threshold Current
High Output Power
PD Built In
High Reliability

Absolute Maxmum Ratings:

Parameter

Symbol

Value

Unit

LD Forward Current

100

LD Reverse Voltage

PD Forward Current

If(PD)

PD Reverse Voltage

Vr(PD)

Operating Temperature

-10~+85

℃

Storage Temperature

-40~+85

℃

Solder Temperature

260

℃

Lead Solder Time

Notice: Above specifications should not be exceeded, or the LD will be seriously damaged.

Optical and Electrical Specification:

Parameter

Symbol

Min.

Tpy.

Max.

Unit

Test Condition

Center Wavelength

λo

λ-20

λ+20

Optical Power

Spectral Width @20dB

Δλ

0.22

Threshold Current

Ith

LD Operating Current

CW, Po=4mW

LD Forward Voltage

1.4

PD Dark Current

1000

Vr(PD)=5V

PD Monitor Current

0.1

Fiber Type

PM Panda Fiber

Notice: Above specifications are tested in room temperature at 23℃.

Slow axis is default aligned to the connector key.

Specifications may change without notice.

Drawing:

Pin Information:

Ordering Information (Part Number):

PMFPLD-WWWW-OO-S-P-J-LL-CC

WWWW

Wavelength

Optical Power

Saddle Type

Pin
Assingment

Fiber Jacket

Fiber Length

Connector

1270 - 1270nm

01 - 1mW

A - Type A

B - 250um Bare Fiber

05 - 0.5m

NE - None

1290 - 1290nm

02 - 2mW

B - Type B

L - 900um Loose Tube

10 - 1.0m

FA - FC/APC

04 - 4mW

C - Type C

15 - 1.5m

FU - FC/UPC

SS - Specify

D - Type D

20 - 2.0m

LA - LC/APC

E - Type E

SS - Specify

LU - LC/UPC

1590 - 1590nm

SA - SC/APC

1610 - 1610nm

SU - SC/UPC

SS - Specify

Notification:

1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to
use grounded anti-static wrist straps and grounded anti-static mats before handling the products.
2. Never plug or unplug the products under a living circuit, setting the current supply to zero before switching on or switching
off the laser diode.
3. Always take anti-static measures to storage the products when not in use.