Description
1550nm High Power PM Semiconductor Optical Amplifier
1550nm High Power PM Semiconductor Optical Amplifier (SOA) is a optic active product which can boost the intensity of optical signal in a fiber optic communication system. The SOA built with angled multi-quantum-well chip to output stable amplified light, one single polarization light will be amplified, the TEC and Thermistor built in to control the device temperature. PM SOA is default with isolator built inside. It features high optical gain, high saturation output power, it’s widely used in Optical Line Amplifier, Optic Non-linear Application and Optoelectronic Integration field, the output signal power can be customized.
| Application: | Features: |  |
| Optical Line Amplifier Optic Non-linear Application Optoelectronic Integration WDM System |
High Optical Gain High Polarization Extinction Ratio Isolator, TEC and Thermistor Built In High Reliability |
Absolute Maximum Ratings:
| Parameter |
Symbol | Value |
Unit | ||
| SOA Forward Current | If | 1200 | mA | ||
| SOA Forward Voltage | Vf | 2.0 | V | ||
| Operating Temperature | T | -10~+70 | ℃ | ||
| Storage Temperature | T | -40~+85 | ℃ | ||
| Solder Temperature | T | 260 | ℃ | ||
| Lead Solder Time | 10 | S | |||
| Notice: Above specifications should not be exceeded, or the device will be seriously damaged. |
Optical and Electrical Specification:
| Parameter |
Symbol | Min. |
Typ. | Max. | Unit | Condition |
| Center Wavelength | λc | 1550 | nm | |||
| 3dB Wavelength Bandwidth | Bw | 70 | nm | |||
| 3dB Saturated Output Power | P | 22 | 23 | dBm | CW, If=1000mA | |
| Input Output Power Range | P | -50 | 10 | dBm | CW | |
| Small Signal Gain | G | 35 | dB | CW, Pi=-25dBm | ||
| Gain Ripple | ΔG | 4 | dB | λc | ||
| Noise Figure | 7.5 | dB | ||||
| Polarization Extinction Ratio | ER | 20 | dB | If=1000mA | ||
| on/off Extinction Ratio | ER1 | 30 | 35 | dB | If=1000mA/0mA, 0dBm | |
| SOA Operating Current | If | 1000 | 1200 | mA | CW | |
| TEC Current | Itec | 2.0 | A | -10~70℃ | ||
| TEC Voltage | Vtec | 3.6 | V | |||
| TEC Set Temperature | T | 35 | ℃ | |||
| Thermistor Current | Ithe | 5 | mA | |||
| Air Tightness | 10-12 | 10-11 | 10-8 | Pa.m3/s | T=25℃ | |
| Thermistor Resistance | Rthe | 9.5 | 10 | 10.5 | KΩ | T=25℃ |
| Fiber Type | PM 1550 Panda Fiber | |||||
| Notice: Above specifications are tested in room temperature at 25℃. |
| Slow axis is default aligned to the connector key. |
| Specifications may change without notice. |
Drawing:
Pin Information:
Ordering Information (Part Number):
| PMSOA-WWWW-PP-J-LL-CC |
||||
| WWWW | PP | J | LL | CC |
| Wavelength | Output Power | Fiber Jacket | Fiber Length | Connector |
| 1550 – 1550nm | 23 – 23dBm | B – 250um Bare Fiber | 02 – 0.2m | NE – None |
| SSSS – Specify | SS – Specify | 9 – 900um Loose Tube | 05 – 0.5m | FA – FC/APC |
| 08 – 0.8m | FU – FC/UPC | |||
| 10 – 1.0m | SA – SC/APC | |||
| 15– 1.5m | SU – SC/UPC | |||
| 20 – 2.0m | LA – LC/APC | |||
| SS – Specify | LU – LC/UPC | |||
| TA – ST/APC | ||||
| TU – ST/UPC | ||||
| SS – Specify | ||||
Example: PMSOA-1550-23-9-10-FA is the PN for 1550nm High Power PM Semiconductor Optical Amplifier, 23dBm Output Power, 1.0m PM 1550 Panda fiber, 900um loose tube, FC/APC
