| 1310nm PM Pigtailed DFB Laser Diode | ||||||||||||||||
|
1310nm PM Pigtailed DFB (Distributed Feedback) Laser Diode is a semiconductor optoelectronic product which can output stable laser light by the pigtailed polarization maintaining fiber. the Laser Diode with PD built in to monitor the optical signal power. It features low threshold current and high quality laser output, it's widely used in Laser imaging, fiber optic sensor and WDM System. Higher Power output type is available. |
||||||||||||||||
 |
||||||||||||||||
|
Application: |
Features: |
|||||||||||||||
|
Data Transmission Fiber Optic Sensor Laser Imaging Testing System |
Low Threshold Current High Output Power PD Built In High Reliability |
|||||||||||||||
| Absolute Maxmum Ratings: | ||||||||||||||||
| Parameter | Symbol | Value | Unit | |||||||||||||
| LD Forward Current | If | 100 | mA | |||||||||||||
| LD Reverse Voltage | Vr | 2 | V | |||||||||||||
| PD Forward Current | If(PD) | 2 | mA | |||||||||||||
| PD Reverse Voltage | Vr(PD) | 15 | V | |||||||||||||
| Operating Temperature | T | -10~+85 | ℃ | |||||||||||||
| Storage Temperature | T | -40~+85 | ℃ | |||||||||||||
| Solder Temperature | T | 260 | ℃ | |||||||||||||
| Lead Solder Time | 10 | S | ||||||||||||||
| Notice: Above specifications should not be exceeded, or the LD will be seriously damaged. | ||||||||||||||||
| Optical and Electrical Specification: | ||||||||||||||||
| Parameter | Symbol | Min. | Tpy. | Max. | Unit | Test Condition | ||||||||||
| Center Wavelength | λo | 1290 | 1310 | 1330 | nm | |||||||||||
| Optical Power | Po |
|
4 |
|
mW | CW | ||||||||||
| Spectral Width @20dB | Δλ | 0.22 |
|
nm | CW | |||||||||||
| Threshold Current | Ith |
|
12 |
|
mA | CW | ||||||||||
| LD Operating Current | If |
|
65 |
|
mA | CW, Po=4mW | ||||||||||
| LD Forward Voltage | Vf | 1.4 |
|
V | ||||||||||||
| PD Dark Current | Id | 1000 | nA | Vr(PD)=5V | ||||||||||||
| PD Monitor Current | Im | 0.1 |
|
|
mA | |||||||||||
| Fiber Type | PM Panda Fiber | |||||||||||||||
| Notice: Above specifications are tested in room temperature at 23℃. | ||||||||||||||||
| Slow axis is default aligned to the connector key. | ||||||||||||||||
| Specifications may change without notice. | ||||||||||||||||
| Drawing: |
|
|||||||||||||||
| Pin Information: | ||||||||||||||||
 |
||||||||||||||||
| Ordering Information (Part Number): | ||||||||||||||||
| PMFPLD-WWWW-OO-S-P-J-LL-CC | ||||||||||||||||
| WWWW | OO | S | P | J | LL | CC | ||||||||||
| Wavelength | Optical Power | Saddle Type |
Pin Assingment |
Fiber Jacket | Fiber Length | Connector | ||||||||||
| 1310 - 1310nm | 01 - 1mW | A - Type A | A - Type A | B - 250um Bare Fiber | 05 - 0.5m | NE - None | ||||||||||
| 02 - 2mW | B - Type B | B - Type B | L - 900um Loose Tube | 10 - 1.0m | FA - FC/APC | |||||||||||
| 04 - 4mW | C - Type C | C - Type C | 15 - 1.5m | FU - FC/UPC | ||||||||||||
| SS - Specify | D - Type D | 20 - 2.0m | LA - LC/APC | |||||||||||||
| E - Type E | SS - Specify | LU - LC/UPC | ||||||||||||||
| SA - SC/APC | ||||||||||||||||
| SU - SC/UPC | ||||||||||||||||
| SS - Specify | ||||||||||||||||
| Notification: | ||||||||||||||||
|
1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to use grounded anti-static wrist straps and grounded anti-static mats before handling the products. 2. Never plug or unplug the products under a living circuit, setting the current supply to zero before switching on or switching off the laser diode. 3. Always take anti-static measures to storage the products when not in use. |
||||||||||||||||
|
||||||||||||||||
1310nm PM Pigtailed DFB Laser Diode
Wavelength: 1310nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: PM Panda Fiber
Leave A Message
If you are interested in our products and need to know more details, please feel free to leave a message here, we will reply within 24 hours.
Related Products
1550nm PM Pigtailed DFB Laser Diode
CWDM PM Pigtailed DFB Laser Diode
TGG Based 1040nm Polarization Insensitive Optical Isolator
High Power 820nm Polarization Insensitive Optical Isolator
635nm In Line Polarizer
1750nm 1x2 2x2 SM Fiber Fused Coupler
1480nm PM Tap+Isolator Hybrid
1580nm 3-port Polarization Insensitive Optical Circulator
1550nm PM Pigtailed DFB Laser Diode
Wavelength: 1550nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: PM Panda Fiber
CWDM PM Pigtailed DFB Laser Diode
Wavelength: 1270-1610nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: PM Panda Fiber
TGG Based 1040nm Polarization Insensitive Optical Isolator
Wavelength: 1040nm
Isolator Type: Polarization Insensitive
Fiber Type: HI 1060, 10/125, 20/130 Fiber
Max. Handling Power: 1W CW
High Power 820nm Polarization Insensitive Optical Isolator
Wavelength: 820nm
Isolator Type: Polarization Insensitive
Fiber Type: HI 780 Fiber
Max. CW Handling Power: 1, 3, 5, 10, 15, 20 or specify
Max. Peak Power: 5, 10, 20 kW
635nm In Line Polarizer
Wavelength: 635nm
Fiber Type: PM Panda Fiber or 630-HP Fiber
Max. Optical Power: 300mW
1750nm 1x2 2x2 SM Fiber Fused Coupler
Wavelength: 1750nm
Fiber Type: SMF-28e Fiber
Max. Optical Power: 2W CW
1480nm PM Tap+Isolator Hybrid
Wavelength: 1480nm
Tap Ratio: 1%, 2%, 3%, 5%, 10%
Fiber Type: PM Panda fiber or SM-28e Fiber
Max. Handling Power: 300mW CW (Higher Power is Available)
1580nm 3-port Polarization Insensitive Optical Circulator
Wavelength: 1580nm
Circulator Type: Polarization Insensitive
Port: 3 ports
Fiber Type: SMF-28e Fiber
Max. Handling Power: 300mW CW
Product Categories
Sign Up To Newsletter
to stay up-to-date on our promotions, discounts, sales, news and more.
© 2025 Seagnol Photonics Co., Ltd. All Rights Reserved / Sitemap / XML
/ Privacy Policy /
IPv6 network supported