| 1550nm PM Pigtailed DFB Laser Diode | ||||||||||||||||
|
1550nm PM Pigtailed DFB (Distributed Feedback) Laser Diode is a semiconductor optoelectronic product which can output stable laser light by the pigtailed polarization maintaining fiber. the Laser Diode with PD built in to monitor the optical signal power. It features low threshold current and high quality laser output, it's widely used in Laser imaging, fiber optic sensor and WDM System. Higher Power output type is available. |
||||||||||||||||
 |
||||||||||||||||
|
Application: |
Features: |
|||||||||||||||
|
Data Transmission Fiber Optic Sensor Laser Imaging Testing System |
Low Threshold Current High Output Power PD Built In High Reliability |
|||||||||||||||
| Absolute Maxmum Ratings: | ||||||||||||||||
| Parameter | Symbol | Value | Unit | |||||||||||||
| LD Forward Current | If | 100 | mA | |||||||||||||
| LD Reverse Voltage | Vr | 2 | V | |||||||||||||
| PD Forward Current | If(PD) | 2 | mA | |||||||||||||
| PD Reverse Voltage | Vr(PD) | 15 | V | |||||||||||||
| Operating Temperature | T | -10~+85 | ℃ | |||||||||||||
| Storage Temperature | T | -40~+85 | ℃ | |||||||||||||
| Solder Temperature | T | 260 | ℃ | |||||||||||||
| Lead Solder Time | 10 | S | ||||||||||||||
| Notice: Above specifications should not be exceeded, or the LD will be seriously damaged. | ||||||||||||||||
| Optical and Electrical Specification: | ||||||||||||||||
| Parameter | Symbol | Min. | Tpy. | Max. | Unit | Test Condition | ||||||||||
| Center Wavelength | λo | 1530 | 1550 | 1570 | nm | |||||||||||
| Optical Power | Po |
|
4 |
|
mW | CW | ||||||||||
| Spectral Width @20dB | Δλ | 0.22 |
|
nm | CW | |||||||||||
| Threshold Current | Ith |
|
12 |
|
mA | CW | ||||||||||
| LD Operating Current | If |
|
65 |
|
mA | CW, Po=4mW | ||||||||||
| LD Forward Voltage | Vf | 1.4 |
|
V | ||||||||||||
| PD Dark Current | Id | 1000 | nA | Vr(PD)=5V | ||||||||||||
| PD Monitor Current | Im | 0.1 |
|
|
mA | |||||||||||
| Fiber Type | PM Panda Fiber | |||||||||||||||
| Notice: Above specifications are tested in room temperature at 23℃. | ||||||||||||||||
| Slow axis is default aligned to the connector key. | ||||||||||||||||
| Specifications may change without notice. | ||||||||||||||||
| Drawing: |
|
|||||||||||||||
| Pin Information: | ||||||||||||||||
 |
||||||||||||||||
| Ordering Information (Part Number): | ||||||||||||||||
| PMFPLD-WWWW-OO-S-P-J-LL-CC | ||||||||||||||||
| WWWW | OO | S | P | J | LL | CC | ||||||||||
| Wavelength | Optical Power | Saddle Type |
Pin Assingment |
Fiber Jacket | Fiber Length | Connector | ||||||||||
| 1550 - 1550nm | 01 - 1mW | A - Type A | A - Type A | B - 250um Bare Fiber | 05 - 0.5m | NE - None | ||||||||||
| 02 - 2mW | B - Type B | B - Type B | L - 900um Loose Tube | 10 - 1.0m | FA - FC/APC | |||||||||||
| 04 - 4mW | C - Type C | C - Type C | 15 - 1.5m | FU - FC/UPC | ||||||||||||
| SS - Specify | D - Type D | 20 - 2.0m | LA - LC/APC | |||||||||||||
| E - Type E | SS - Specify | LU - LC/UPC | ||||||||||||||
| SA - SC/APC | ||||||||||||||||
| SU - SC/UPC | ||||||||||||||||
| SS - Specify | ||||||||||||||||
| Notification: | ||||||||||||||||
|
1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to use grounded anti-static wrist straps and grounded anti-static mats before handling the products. 2. Never plug or unplug the products under a living circuit, setting the current supply to zero before switching on or switching off the laser diode. 3. Always take anti-static measures to storage the products when not in use. |
||||||||||||||||
|
||||||||||||||||
1550nm PM Pigtailed DFB Laser Diode
Wavelength: 1550nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: PM Panda Fiber
Leave A Message
If you are interested in our products and need to know more details, please feel free to leave a message here, we will reply within 24 hours.
Related Products
1310nm PM Pigtailed DFB Laser Diode
CWDM PM Pigtailed DFB Laser Diode
High Power 1064nm SM Tap+Isolator Hybrid
1550/780 1x2 PM Filter WDM
915nm In Line Polarizer
2000nm SM Isolator+BPF Hybrid
High Power 635nm Polarization Insensitive Optical Isolator
1550/2000nm 1x2 Fused WDM
1310nm PM Pigtailed DFB Laser Diode
Wavelength: 1310nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: PM Panda Fiber
CWDM PM Pigtailed DFB Laser Diode
Wavelength: 1270-1610nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: PM Panda Fiber
High Power 1064nm SM Tap+Isolator Hybrid
Wavelength: 1064nm
Tap Ratio: 1%, 2%, 3%, 5%, 10%
Fiber Type: HI 1060 fiber
Max. Handling Power: 0.5, 1, 3, 5, 10, 20W
1550/780 1x2 PM Filter WDM
Wavelength: 1550/780nm
Configuration: 1x2
Fiber Type: PM Panda Fiber or HI 780 Fiber
Max. Handing Power: 500mW CW
915nm In Line Polarizer
Wavelength: 915nm
Fiber Type: PM Panda Fiber or HI 1060 Fiber
Max. Optical Power: 300mW
2000nm SM Isolator+BPF Hybrid
Wavelength: 2000nm
Pass Band: 1, 2, 5, 8, 15nm
Stop Band: 6, 10, 12, 25nm
Max. Handling Power: 300mW CW
High Power 635nm Polarization Insensitive Optical Isolator
Wavelength: 635nm
Isolator Type: Polarization Insensitive
Fiber Type: 630-HP Fiber
Max. CW Handling Power: 0.5, 1, 2 or specify
Max. Peak Power: 5kW or specify
1550/2000nm 1x2 Fused WDM
Wavelength: 1550/2000
Configuration: 1x2 2x2
Fiber Type: SMF-28e or SM 1950
Max. Handling Power: 2W CW (higher power up to 20W is available)
Product Categories
Sign Up To Newsletter
to stay up-to-date on our promotions, discounts, sales, news and more.
© 2025 Seagnol Photonics Co., Ltd. All Rights Reserved / Sitemap / XML
/ Privacy Policy /
IPv6 network supported