| 1310nm SM Pigtailed DFB Laser Diode | ||||||||||||||||
 1310nm SM Pigtailed DFB ( Distributed Feedback) Laser Diode is a semiconductor optoelectronic product which can output stable laser light by the pigtailed singlemode fiber, it's widely used in Telecom Data Transfer, Fiber Optic Sensor Application, the DFB Laser Diode also with PD built in to monitor the signal power, the pigtail also can be customized to MM, PM type upon request. |
||||||||||||||||
| Application: | Features: | |||||||||||||||
|
Data Transmission Fiber Optic Sensor Laser Imaging Testing System |
Low Threshold Current High Output Power PD and Isolator Built In High Reliability |
|||||||||||||||
| Absolute Maxmum Ratings: | ||||||||||||||||
| Parameter | Symbol | Value | Unit | |||||||||||||
| LD Forward Current | If | 150 | mA | |||||||||||||
| LD Reverse Voltage | Vr | 2 | V | |||||||||||||
| PD Forward Current | If(PD) | 2 | mA | |||||||||||||
| PD Reverse Voltage | Vr(PD) | 15 | V | |||||||||||||
| Operating Temperature | T | -40~+85 | ℃ | |||||||||||||
| Storage Temperature | T | -40~+85 | ℃ | |||||||||||||
| Solder Temperature | T | 260 | ℃ | |||||||||||||
| Lead Solder Time | 10 | S | ||||||||||||||
| Notice: Above specifications should not be exceeded, or the LD will be seriously damaged. | ||||||||||||||||
| Optical and Electrical Specification: | ||||||||||||||||
| Parameter | Symbol | Min. | Tpy. | Max. | Unit | Test Condition | ||||||||||
| Center Wavelength | λc | 1300 | 1310 | 1320 | nm | |||||||||||
| Optical Power | Po | 1 | 2 | 4 | mW | CW | ||||||||||
| Spectral Width @-20dB | Δλ | 0.1 | 0.2 | nm | CW | |||||||||||
| Optical Isolation | For Single Stage | ISO | 30 | 35 | dB | |||||||||||
| For Dual Stage | ISO | 50 | 55 | dB | ||||||||||||
| Threshold Current | Ith | 5 | 10 | mA | CW | |||||||||||
| LD Operating Current | Iop | 45 | 55 | mA | CW, Po=2mW | |||||||||||
| LD Forward Voltage | Vf | 1.2 | 1.5 | V | CW, If=45mA | |||||||||||
| Response Time (Raise/Fall) | Tr/Tf |
|
0.4 | ns | ||||||||||||
| Monitor Dark Current | Id | 1000 | nA | Vr(PD)=5V | ||||||||||||
| PD Monitor Current | Im | 0.1 |
|
0.9 | mA | CW | ||||||||||
| Modulation Bandwidth | BW | 1.25 | 2.5 | 4.25 | GHz | |||||||||||
| Side Mode Suppression Ratio | SMSR | 35 | 40 | dB | ||||||||||||
| Fiber Type | SMF-28e Fiber | |||||||||||||||
| Notice: Above specifications are tested in room temperature at 23℃. | ||||||||||||||||
| Specifications may change without notice. | ||||||||||||||||
| Drawing: |
|
|||||||||||||||
| Pin Information: | ||||||||||||||||
|
||||||||||||||||
| Ordering Information (Part Number): | ||||||||||||||||
| SMDPLD-WWWW-OO-I-S-P-FF-J-LL-CC | ||||||||||||||||
| WWWW | OO | I | S | P | FF | J | LL | CC | ||||||||
| Wavelength |
Optical Power |
Isolator | Saddle Type |
Pin Assingment |
Fiber Type | Fiber Jacket | Fiber Length | Connector | ||||||||
| 1310 - 1310nm | 01 - 1mW | N - None | A - Type A | A - Type A | S2 - SMF-28e | B - 250um | 05 - 0.5m | NE - None | ||||||||
| 02 - 2mW | S - Single | B - Type B | B - Type B | Bare Fiber | 10 - 1.0m | FA - FC/APC | ||||||||||
| 03 - 3mW | D - Dual | C - Type C | C - Type C |
L - 900um |
15 - 1.5m | FU - FC/UPC | ||||||||||
| SS - Specify | D - Type D | Loose Tube | 20 - 2.0m | LA - LC/APC | ||||||||||||
| E - Type E | SS - Specify | LU - LC/UPC | ||||||||||||||
| SA - SC/APC | ||||||||||||||||
| SU - SC/UPC | ||||||||||||||||
| SS - Specify | ||||||||||||||||
| Notification: | ||||||||||||||||
|
1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to use grounded anti-static wrist straps and grounded anti-static mats before handling the products. 2. Never plug or unplug the products under a living circuit, setting the current supply to zero before switching on or switching off the laser diode. 3. Always take anti-static measures to storage the products when not in use. |
||||||||||||||||
|
||||||||||||||||
1310nm SM Pigtailed DFB Laser Diode
Wavelength: 1310nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: SMF-28e Fiber
Leave A Message
If you are interested in our products and need to know more details, please feel free to leave a message here, we will reply within 24 hours.
Related Products
CWDM SM Pigtailed DFB Laser Diode
1550nm SM Pigtailed DFB Laser Diode
1577nm SM Pigtailed DFB Laser Diode
1625nm SM Pigtailed DFB Laser Diode
1650nm SM Pigtailed DFB Laser Diode
850nm 2x2 Polarization Beam Combiner/Splitter
1064±50nm Broadband PM Fiber Optic Isolator
CWDM SM Pigtailed DFB Laser Diode
Wavelength: 1270-1610nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: SMF-28e Fiber
1550nm SM Pigtailed DFB Laser Diode
Wavelength: 1550nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: SMF-28e Fiber
1577nm SM Pigtailed DFB Laser Diode
Wavelength: 1577nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: SMF-28e Fiber
1625nm SM Pigtailed DFB Laser Diode
Wavelength: 1625nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: SMF-28e Fiber
1650nm SM Pigtailed DFB Laser Diode
Wavelength: 1650nm
LD Type: Fiber Pigtailed
LD Chip: DFB
Fiber Type: SMF-28e Fiber
850nm 2x2 Polarization Beam Combiner/Splitter
Wavelength: 850nm
Fiber Type: PM Panda Fiber or HI 780 Fiber
Max. Optical Power: 500mW (Higher to 10W is available upon request)
1064±50nm Broadband PM Fiber Optic Isolator
Wavelength: 1064nm
Bandwidth: ±50nm
Isolator Type: Polarization Maintaining
Fiber Type: PM Panda Fiber
Max. Handling Power: 500mW CW
Product Categories
Sign Up To Newsletter
to stay up-to-date on our promotions, discounts, sales, news and more.
© 2024 Seagnol Photonics Co., Ltd. All Rights Reserved / Sitemap / XML
/ Privacy Policy /
IPv6 network supported